battery needs reconditioning for preserve the battery’s accumulator
properties for a long time. This starts with the first phase of use
where two operations are often unavoidable: a full load followed by a
break-in. This second method serves to balance the capabilities of the
battery cells. This involves reloading the device at 100% and then
unloading at about 15% or 10% for at least 5 cycles continuously.
Subsequently, modern batteries generally have no memory effect. They are
recharged as needed without being totally discharged.
In practice, sustaining a battery is a lot of subtlety. In particular,
it is observed that the battery lives and performs better with 50 to 95%
charge on each run. And to avoid rapid degradation of the battery, to
avoid using it with a load of less than 30% and to keep it (without use)
repeatedly with a load of 95 to 100%. But to ensure a balance of
charges, it is instead recommended to recharge 100% every 3 months.
Then, you must use compliant and appropriate chargers, knowing the
maximum or minimum voltage supported by the battery. Finally:
prohibition to charge directly after use when the battery is still hot 53904
Post a Comment
ما رأيك ..... شاركنا الرأي